Quality Control
Quality Control & Testing for Every Pool
No Inflatable Pool Factory pool leaves the factory without passing a 24–48 hour pressure-drop test and a full inspection of seams, valves and dimensions. This is the QC system behind our wholesale and OEM/ODM programs.
Six Checks Before Packing
Quality at Inflatable Pool Factory is not a final random spot-check — it is a sequence of checks woven through production, ending with a hold-time test that verifies the finished product as a whole.
24–48 Hour Pressure-Drop Test
Every completed pool is inflated to its rated operating pressure and held for 24–48 hours. Any measurable pressure drop, deformation or leak means the unit does not ship.
Valve & Seal Verification
Filter-pump ports, shut-off valves, drain valves and over-inflation safety valves are individually checked for absolute air and water tightness after heat-sealing.
Full Seam & Rail Inspection
Welded seams, reinforced rail bands and corners are visually inspected on every unit for continuity, flatness and spec adherence — no skipped stitches, no pinholes.
Dimensional Control
Finished height, diameter and squareness are checked against engineering drawings so pools match the published dimensions and packed sizes on the price list.
Material Compliance
UV-resistant, REACH-compliant double-layer drop-stitch PVC with proven full-season outdoor service life — the same fabric family as our SUP boards.
Packing & Loading Check
Inclusions (1000W pump, repair kit, covers where applicable) are verified against the packing list before carton sealing and container loading.
Pressure Test Standards
Published pressure limits are enforced on 100% of production — not on a sample basis.
Performance Claims & Evidence
Every performance claim on this site maps to how it is verified, which models it applies to, and where its limits are. Model-specific values and documentation ship with each product.
| Claim | Applies To | Test / Verification | Result | Use Limitations |
|---|---|---|---|---|
| Rigid walls at rated pressure | All collections | Inflated to rated operating pressure; 24–48 hour pressure-drop test on 100% of units | No measurable pressure drop, deformation or leak at hold time | Rigidity depends on inflating to the pressure specified for each model — see product documentation |
| Rated operating pressure 4–5 PSI | All pool and SPA tub models | Factory QC test at 6 PSI; maximum tolerance 8 PSI; pressure-relief valve auto-release above 6 PSI | Published pressure limits enforced on every production unit, not on a sample basis | Do not exceed the rated pressure for each model; higher pressure does not increase stiffness safely |
| Inflation in 5–15 minutes | All models | Using the included 1000W electric air pump, per model | Full rigidity reached within the published range depending on model size | Excludes site preparation and water filling — filling time varies with pool capacity and water supply |
| Drop-stitch wall construction | All collections | Demonstrated in the product demo videos — inflation and rigidity under load | Walls hold shape when filled; see the videos at /products/specs#videos | Walls are not designed for sitting, standing or jumping unless stated for a specific model |
| UV-resistant, REACH-compliant PVC | All collections | Material compliance check on double-layer drop-stitch PVC per production batch | Full-season outdoor service life in normal residential use | Cover the pool when not in use for longest material life; store dry and out of sun in the off-season |
| Safety standards EN 16582-1 / ASTM F2666 | Residential pool models | Design reference; model-specific safety information provided in the product documentation | Residential designs reference the applicable clauses of both standards | Design reference only — excludes public-use pools and SPA tubs; does not certify commercial installations |
Demo videos for inflation and rigidity are published at Product Videos. Model-level safety and use documentation is provided with each product.
After-Sales Commitment
Every pool ships with a repair kit for field fixes, and spare parts — valves, patches, pumps and covers — remain available through our support team at info@inflatablepoolfactory.com for the life of the product. Wholesale and OEM partners receive priority spare-part allocation with their orders.