TL;DR
Pick level ground, clear it of debris, lay a ground sheet, inflate the walls to rated pressure, and fill. Total setup time is 15–30 minutes plus filling time.
Expert Review
Written by Inflatable Pool Factory Pool Team · Published August 1, 2026 · Updated October 16, 2026
Reviewed by Product & Quality Team · Quality & Engineering
The Problem
Rushed setup on poor ground causes sagging walls, uneven water line, leaks from sharp objects, and a pool that never sits right.
The Solution
Follow the full checklist: level ground, debris-free surface, ground sheet, even inflation, and a water fill that stops at the recommended line.
Step by Step
- Choose a firm, level spot away from overhanging trees
- Remove all stones, sticks, and sharp objects from the area
- Lay the included or separate ground sheet
- Unroll the pool and position it — you cannot move it once filled
- Inflate the walls with the supplied pump to the rated PSI
- Check all valves are closed and secure
- Fill with water to the recommended fill line (usually 80–90%)
- Connect the filter pump if included and run it for an initial cycle
Frequently Asked Questions
Can I set up a pool on grass? ▼
Yes, level grass works well. Mow it short, remove clippings and debris, and use a ground sheet underneath to protect the pool base.
How full should I fill the pool? ▼
Fill to 80–90% of wall height. Overfilling stresses the walls; underfilling reduces stability and usable depth.